Filter
Top Products
Paging / Chain dialing / Clock & Alarm Settings
17
Paging
This feature allows you to locate the handset(s).
Press on the base station.Press any key on the handset to stop ringing
once relocated.
All the
subscribed
handsets ring.
Chain Dialing
If you have entered in your phonebook for example only the main number of a
company without the extension,this feature allows you to add the subnumber
(extension) of a particular person and to dial out this number.
Take the line
open phonebook list scroll to select to dial first part
each digit blinks to indicate dialed out.
enter the extension
Clock and Alarm Settings
✦ To set the Date and Time
Press CLOCK/ALARM DATE/TIME
press Down 1 time
to confirm.
enter the date enter the time
Press to display the date and time.
Note: If you are connected to an ISDN line,the date & time may be updated
after each call.Please check the date & time settings in your ISDN system.
✦ To set or change the alarm clock settings
Press CLOCK/ALARM
press Down 1 time press Down 1 time
SET ALARM to confirm.
scroll to select*
If you select ON ONCE or ON DAILY :
to confirm.
enter the time
Note:When the alarm rings,press any key to stop the alarm.
To delete a
character use
BACK.
*Choose :
OFF or
ON ONCE or
ON DAILY
The alarm
rings for at
most 1 minute
and ALARM
is shown in
idle mode.
DECT122_GBIE_09.qxd 27.09.2005 17:06 Seite 17