Filter
Top Products
45
EN
Advanced Settings
Reset
Reset to default settings
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Reset and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK.
3. Scroll
: to Yes and press mSELECT.
A confirmation beep is emitted, and the unit is reset to its default settings (please see "Default settings" on
page 16).
Auto Prefix
The maximum length of an auto prefix number is 5 digits. Once the number is set, it will be automatically
inserted at the beginning of each number that will be dialled.
To set auto prefix number
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Auto prefix and press
mSELECT.
2. The last stored auto prefix number is displayed (if any).
3. Enter the number and press
mSELECT to confirm.
A confirmation beep is emitted and the screen returns to previous menu.
Country Setting
The availability of this menu is dependent on your country.
You can select another country different from the one chosen during Welcome mode.
1. Press
mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Country and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
If your PIN number is the default 0000, step 2 is skipped.
The WELCOME mode will appear again after master reset.
You need to enter the Master PIN even if your PIN is 0000 (default PIN).
SE630_IFU_EN.book Page 45 Wednesday, September 20, 2006 5:58 PM