Filter
Top Products
44
EN
Advanced Settings
Unregistration
To unregister a handset
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Unregistration and
press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Press on the handset keypad the handset number corresponding to the handset that you wish to
unregister.
A long confirmation beep is emitted to indicate successful unregistration and the screen shows
Unregistered.
Change Master PIN
The Master PIN is used for setting call barring/baby call number and for registration/unregistration of handsets.
The default Master PIN number is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the
settings of your handset. Your handset will prompt you whenever the PIN is required.
To change Master PIN
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Change PIN and press
mSELECT.
2. Enter the current Master PIN when prompted and press
mOK to confirm. The PIN entered will be
shown as asterisks (*) on the screen.
3. Enter new PIN and press
mOK.
4. Enter new PIN again and press
mOK to confirm PIN change.
A confirmation tone is emitted, the message New PIN Stored appears and the screen returns to
previous menu.
If there are no key presses within 15 seconds, the unregistration procedure will be aborted and the
handset returns to stand-by mode.
If an incorrect PIN is entered, Incorrect Pin will be displayed and the screen returns to stand-by
mode.
If your PIN number is the default 0000, step 2 is skipped.
If the Master PIN is modified, you will be required to enter the Master PIN before you can modify
Call Barring and Baby Call settings.
SE630_IFU_EN.book Page 44 Wednesday, September 20, 2006 5:58 PM