Filter
Top Products
41
EN
Advanced Settings
Dial Mode
The default value for dial mode that is preset in your SE630 should be the best suited for your country
network and therefore you should not need to change it.
There are 2 dial modes: Tone or Pulse.
To set dial mode
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Dial Mode and press
mSELECT.
2. Scroll
: to Tone or Pulse and press mSELECT to confirm.
A confirmation beep is emitted and the screen returns to previous menu.
Call Barring
Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain
numbers. You can set up to four different barring numbers, with each number containing up to 4 digits.
To activate/deactivate Call Barring mode
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Call Barring and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Press
mSELECT to enter Barring Mode.
4. Scroll
: to On or Off and press mSELECT to confirm.
A confirmation tone is emitted and the screen returns to previous menu.
To modify Call Barring number
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Call Barring and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Scroll
: to Barring Number and press mSELECT.
4. Scroll
: to Number 1, Number 2, Number 3 or Number 4 and press mSELECT to confirm.
5. Enter a maximum of 4 digits and press
mOK to confirm.
A confirmation beep is emitted and the screen returns to stand-by mode.
If you have modified the Master PIN before and it is not the default 0000, you will be required to
enter the Master PIN before you can activate or deactivate call barring mode, add or modify call
barring number.
If a restricted number is dialled, the call will not be connected. When this happens, the phone emits
an error tone and returns to stand-by mode.
SE630_IFU_EN.book Page 41 Wednesday, September 20, 2006 5:58 PM