Filter
Top Products
32
EN
SMS
3. Enter box name (maximum 12 characters) and press mOK.
4. Enter a password (maximum 8 digits) and press
mOK.
5. Enter the password again and press
mOK.
6. Enter the SMS box number and press
mOK.
If the confirmation password is correct, the new SMS box will be created. A long confirmation beep is
emitted and the screen returns to SMS box list.
To change the password of an SMS Box (only for UK)
1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to SMS Boxes and press mSELECT.
2. Scroll
: to the SMS box for which you wish to change password and press mSELECT.
3. Scroll
: to Change Passwd and press mSELECT.
4. Enter old password and press
mOK.
5. Enter new password, press
mOK and enter the new password again for confirmation.
6. Press
mOK to confirm password change.
To delete an SMS Box (only for UK)
1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to SMS Boxes and press mSELECT.
2. Scroll
: to the SMS box you wish to delete and press mMENU.
3. Scroll
: to Delete Box and press mSELECT.
4. Enter password (if needed) and press
mOK to confirm box deletion.
To change the box number of an SMS Box (only for UK)
1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to SMS Boxes and press mSELECT.
2. Scroll
: to the SMS box you for which wish to change the box number and press mMENU.
3. Scroll
: to Change Box Nr and press mSELECT.
4. Enter the new box number and press
mOK to confirm box number change.
To set outgoing number
The incoming and outgoing numbers of your SE630 are already set to work on your country network.
We advise you not to modify these settings. For more details or in case of any problems, please contact your
local network provider.
1. Press
mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to SMS Center 1, SMS Center 2 or SMS Center 3 and press mSELECT.
2. Press
mSELECT to enter Outgoing Nr..
You can choose to leave the password empty. If no password is required, simply press mOK
when prompted to enter password.
SE630_IFU_EN.book Page 32 Wednesday, September 20, 2006 5:58 PM