Filter
Top Products
42
EN
Advanced Settings
Baby Call
When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This
feature is very useful for direct access to emergency services.
To activate Baby Call mode
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Press
mSELECT to enter Mode.
4. Scroll
: to On and press mOK to confirm.
5. Enter the Baby Call number and press
mOK to confirm.
A confirmation message will be displayed on the screen.
To deactivate Baby Call mode
1. Long press mMENU (when Baby Call mode has been activated before).
2. Scroll
: to Off and press mSELECT to confirm.
To change Baby Call number
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Scroll
: to Number and press mSELECT.
4. The last stored Baby Call number is displayed (if any).
5. Enter the new Baby Call number and press
mOK to confirm.
A long confirmation beep is emitted and the screen returns to previous menu.
You can enter up to 24 digits for baby call number.
If you have modified the Master PIN before and it is not the default 0000, you will be required to
enter the Master PIN before you can activate or deactivate Baby Call mode or change Baby Call
number.
When Mode is activated but the Baby Call number is not set yet, your handset will prompt you to
enter a number.
SE630_IFU_EN.book Page 42 Wednesday, September 20, 2006 5:58 PM