Filter
Top Products
39
EN
Personal Settings
Babysit mode
You must have at least 2 handsets registered to your base station to be able to use this feature (see page 43
"To register an additional handset").
This feature allows you to monitor, e.g. the baby’s room. Place the handset in the room to be monitored. If the
sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically
call another handset registered on the same base station.
To use the Babysit feature you need to activate it (e.g. on handset 1) and enter the number of the handset to
be called (e.g. handset 2) in the event that there are noises in the monitored room. Place the handset which is
in Babysit mode (e.g. handset 1) in the room to be monitored. If this handset detects a sound level greater than
a certain threshold, it will automatically initiate an internal call to the selected handset (e.g. handset 2).
To activate Babysit mode
1. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Babysit mode and press
mSELECT.
2. Enter the number of the handset you wish to call to and press
mOK to activate.
To deactivate Babysit mode
1. Press m, select Off and press mOK.
In Babysit mode, all keys are deactivated except for m key. Babysit mode is displayed on the
screen when this function is activated and the handset cannot make or receive calls.
SE630_IFU_EN.book Page 39 Wednesday, September 20, 2006 5:58 PM