Filter
Top Products
29
EN
To change the dial mode* *Country dependent
The default value of dial mode that is preset in your CD 135 should be the best suited for
your country network and therefore you should not need to change it.
1. Press and press Down to reach ADVANCE SET.
2. Press and press Down to reach DIAL MODE.
3. Press , scroll to select TONE or PULSE and press to confirm.
Local area code setting* *Country dependent
If your local PSTN sends the CID with local area code attached, it is necessary to filter out
the local area code when dial back from call log. The AREA CODE function allows you to
remove the local area code from the call log entries. The local area code can be set from
1 to 4 digits. The default setting is blank.
1. Press and press Down to reach ADVANCE SET.
2. Press and press Down to reach AREA CODE.
3. Press to view the current setting.
4. Enter the new area code (the maximums for the area code is 4 digits) and
press to save.
To set or change Call Barring
This menu allows you to limit the use of your phone to specific calls by barring parts
(prefix) of outgoing numbers. You can set 4 different barring numbers.
1. Press and press Down to reach ADVANCE SET.
2. Press and press Down to reach CALL BARRING.
3. Press and enter the PIN code (by default the PIN code is 0000).
4. Press , press Down to reach BARR NUMBER and press .
Advanced settings