Filter
Top Products
11
EN
Installing and replacing the batteries in the
handset
To insert the batteries, open the battery cover, place the batteries as
indicated and then replace the battery cover. When the battery icon is
blinking, charge is needed. Allow 24 hours for the batteries to fully charge.
On first use it may be necessary to wait for a few minutes before seeing
symbols on the display.
The warranty does not apply to the batteries and any other components
which have a limited lifetime or are exposed to wear.
Batteries should not be disposed of with general household waste.
Battery life and range
Optimal battery life is reached after 3 cycles of complete charging & discharging. When
reaching the range limit and the conversation becomes crackly, move closer to the base.
To reach optimal range, place the base station away from electrical appliances.
The GAP standard guarantees that all DECT
TM
GAP handsets and base stations comply
with a minimum operating standard irrespective of their make. Your CD 135 handset and
base station are GAP compliant, which means the minimum guaranteed functions are :
register a handset, take the line, receive a call and dial. The advanced features may not be
available if you use another handset than a CD 135 with your base station.
To register and use your CD 135 handset with a GAP standard base station of a different
make, first follow the procedure described in the manufacturer’s instructions, then follow
the procedure described on page 31.
Battery life in talk
time
Battery life in
standby mode
Indoor range Outdoor range
up to 12 hours up to 150 hours up to 50 metres up to 300 metres
Using GAP standard compliance
Warning : the base station must always be plugged into the mains
when charging or when in use. Always use rechargeable batteries.
Warning ! Always use the line cable provided with the product
otherwise you may not have a dialling tone.
Installing the batteries