Open as PDF
Environment & Safety
This equipment is not designed for making emergency calls when the power fails. An alternative has to
be made available for making emergency calls.
The product requires an electrical supply of 220-240V, alternating monophased power, excluding IT
installations defined in standard EN 60-950.
The electrical network is classified as hazardous according to criteria in the standard EN 60-950.The only
way to power down the product is to unplug the power supply from the electrical outlet. Ensure the
electrical outlet is located close to the apparatus and is always easily accessible.
The voltage on the network is classified as TNV-3 (Telecommunications Network Voltages) as defined in
the standard EN 60-950.
Do not allow the handset to come into contact with liquids. Do not open the handset or the base
station.This could expose you to high voltages. Do not allow the charging contacts or the battery to
come into contact with conductive materials.
Please remember to observe the local regulations regarding the disposal of your packaging materials,
exhausted batteries and old phones and where possible promote their recycling.
We, PHILIPS Consumer Electronics
72081 Le Mans Cedex 9
Declare that the products DECT121xx are in compliance with ANNEX IV of the R&TTE-Directive 1999/5/
EC and then with the following essential requirements:
Article 3.1 a: (protection of the health & the safety of the user) Safety : EN 60950-1 (10/2001)
SAR : EN 50371 (2002)
Article 3.1 b: (protection requirements with respect to electromagnetic compatibility)
EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)
Article 3.2: (effective use of the radio spectrum) Radio : EN 301 406 V1.5.1 (2003)
The presumption of conformity with the essential requirements regarding Council Directive 1999/5/EC is
Date: 04/03/2005 Le Mans
Product Quality Manager
This product can only be connected to the analogue telephone network of the country indicated on the
sticker located under the base station.
DECT121(180105).pmd 02/02/2005, 22:4416