Filter
Top Products
13
To select recall type (key R setting)
The use of some services accessed with R+1, R+2 and R+3 (call
waiting, call forward...) will depend on the flash setting (short/
long) according to your installation type (ISDN, Public, PABX).
Press the Program key.
Press R.
Select 1, 2, ..., or 7.
Press the Program key to save the setting.
Several flash times are available:
1 = 80 ms ; 2 = 100 ms ; 3 = 120 ms ; 4 = 180 ms
5 = 250 ms ; 6 = 300 ms ; 7 = 600 ms
Refer to your PABX user manual to set the flash time.
To select dial mode (tone/pulse)
Press the Program key.
Press *.
Press 1 (pulse mode) or 2 (tone mode).
Press the Program key to save the setting.
Pulse dialling (also called
loop disconnect
) is used in countries
with DTMF tone dialling capability or using old PABX.
To activate/deactivate key tones
Press the Program key
.
Press 7 to activate/deactivate the key tones.
Press the Program key to save the setting.
DECT121(180105).pmd 02/02/2005, 22:4413