Filter
Top Products
NAT Settings 61
SmartLink 4050 Series Getting Started Guide 5 • Using the configuration menu
NAT Settings
Click on NAT Settings to display the configuration window (see figure 28). Select NAT mode for ROUTE
Mode or Bridge Mode.
Figure 28. NAT Settings window
Auto-Provision
Click on Auto Provision to display the configuration window (see figure 28).
Figure 29. Auto-Provision window
• Protocol: Support FTP, HTTP and TFTP for downloading firmware and configuration automatically.
Default is NO to disable the function
• FTP / HTTP / TFTP: IP address of the Auto Provision server
• FTP / HTTP / TFTP Port: Listening port of the Auto Provision server
• Username (Protocol = FTP or HTTP): The username required by Auto Provision server for authorization.
• Password (Protocol = FTP or HTTP): The password required by Auto Provision server for authorization.
• Encryption: Choose YES to receive and decrypt the encrypted configuration files
• Encryption Key: The key which is provided by administrator for decrypting the encrypted configuration
files
• Refresh Interval (hr): The time at which the IP phone connects to the Auto Provision server for checking
update.