Filter
Top Products
3. Configuration Using the Web Interface
8900-A2-GB20-30 June 2004
3-17
Configuring Traffic Profiles
Use the Configuration - Profile Traffic Descriptor screen to define, modify, and
delete ATM traffic profiles.
To create a traffic profile:
1. On the Configuration - Profile Traffic Descriptor screen, click on Create New
Profile. The first Configuration - Profile Traffic Descriptor Create screen
appears.
2. Select a Class of Service (CoS) from the drop-down list:
— UBR - Unspecified Bit Rate
— CBR - Constant Bit Rate
— nrt-VBR - Non-Real-Time Variable Bit Rate
— rt-VBR - Real-Time Variable Bit Rate
3. The Configuration - Profile Traffic Descriptor Create - CoS screen appears.
What fields are displayed depends on the Class of Service. Enter or select:
4. Click on Apply.
Field Description
Profile Name Enter a name for this profile.
PCR Enter a Peak Cell rate from 0 to 351566.
SCR Enter a Sustainable Cell Rate from 0 to 351566.
CDVT Enter a Cell Delay Variation Tolerance from 0 to 100000.
If you enter 0, a CDVT value is automatically calculated.
MDCR Enter a Minimum Desired Cell Rate from 0 to 351566.
MBS Enter a Maximum Burst Size from 0 to 351566.
Tagging Select Yes or No from the drop-down list to determine if
tagging is allowed for this profile.
Traffic Policing Select Yes or No from the drop-down list to determine if
traffic policing is allowed for this profile.
Packet Discard Select Yes or No from the drop-down list to determine if
partial packet discards are allowed for this profile.
Shaping Select Yes or No from the drop-down list to determine if
shaping is allowed for this profile.