Recording a conversation
22 For assistance, please visit http://www.panasonic.com/consumersupport
LThe unit will play back the new recorded
conversations.
LWhen you have no new recorded
conversations, the unit will play back all
recorded conversations.
LIf the unit has no recorded
conversations, the display will show
“No recordings”, and the unit will go
back to standby mode.
Note:
LThe current conversation number (for
example, “#1”) is displayed during
playback.
During playback
To adjust the speaker volume
Press {>} or {<} repeatedly during
playback. 8 levels (high to low) are
available. “Receiver volume” is
displayed.
Erasing a specific conversation
1 Press {ERASE} ({F2} key) while
listening to the conversation you want
to erase.
2 Press {SELECT} ({F3} key) at
“Individual erase”.
LThe display shows “Erased”, then
the next one will be played.
Erasing all conversation
1 Press {ERASE} ({F2} key) while
listening to the conversation.
2 Press {<} or {>} to select
“All erase”.
3 Press {SELECT} ({F3} key).
LThe display shows “All Erased”.
Key Command
{FF}
({F3} key)
Change fast-forward speed
(four times or sixty times
normal speed), each time
you press {FF}
LIf {PLAY} ({F2} key) is
pressed during fast-
forwarding, playback will
be resumed at normal
speed.
LThe selected speed will
flash on the display (“x4”
or “x60”).
{REW}
({F1} key)
Change rewind speed (four
times or sixty times normal
speed), each time you
press {REW}
LIf {PLAY} ({F2} key) is
pressed during rewinding,
playback will be resumed
at normal speed.
LThe selected speed will
flash on the display (“x4”
or “x60”).
{*} (<) Repeat conversation
LIf {*} (<) is pressed
within the first 2 seconds,
the previous conversation
will be played.
LIf {*} (<) is pressed
during playback of the
first conversation, the first
conversation will be
repeated.
{#} (>) Skip conversation
{0} (22) Pause playback
LTo resume playback,
press {PLAY} ({F2} key).
LTo stop playback
completely, press
{STOP}.
{STOP} Stop playback
Key Command
TS730S.book 22 ページ 2005年7月19日 火曜日 午後1時59分