Filter
Top Products
Troubleshooting
46
For assistance, please visit http://www.panasonic.com/phonehelp
You cannot store a name
and phone number in
memory.
• Programming is not possible when the
handset is off the cradle or the
SP-PHONE/HEADSET indicator lights.
• Check that the batteries are installed in
the unit and that the battery power is not
low.
• Do not pause for over 60 seconds while
storing.
• Do not enter a phone number more than
32 digits long.
• When using the Call Restriction feature
(p. 40), you cannot store a phone
number in the Direct Dial memory
([M1], [M2] or [M3]) and emergency
numbers (#).
•If “Phonebook full” is displayed,
erase other stored items from the
Phonebook memory (p. 33).
While programming or
searching, the unit starts to
ring and stops the program/
search.
• To answer the call, lift the handset or
press [SP-PHONE/HEADSET]. Start
again from the beginning after hanging
up.
The display exits the Caller
List.
• Do not pause for over 60 seconds while
searching.
You cannot redial by
pressing [REDIAL].
• If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.
Information stored in the
Redial List is erased.
• If “ ” flashes, replace the batteries as
soon as possible. Otherwise,
information stored in the Redial List may
be erased, and beep may not sound.
Store the desired item in the Phonebook
or Direct Dial memory, if necessary.
Problem Cause and Remedy
TS600W.book Page 46 Friday, October 28, 2005 2:10 PM