Filter
Top Products
13
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your
phone comes from the factory set to 2.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Program ?” by pressing [4] or
[
3]. Press [OK] (Yes key).
3
Scroll to “LCD contrast ?” by pressing
[
4] or [3] and press [OK] (Yes key).
• The current setting is displayed.
4
Press [OK] (Yes key).
5
Select the desired contrast by pressing
[
4] or [3].
• Each time you press [4] or [3], the LCD
contrast will change.
6
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit the programming mode, press
[EXIT] or wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone comes
from the factory set to HIGH.
LCD contrast ?
34
[OK]=Yes
LCD contrast
Low
????
High
34
[OK]=Save
LOW
OFF HIGH
RINGER
RINGER Selector:
Set to HIGH, LOW or
OFF.
• When set to OFF,
the unit will not ring.
TS600W.book Page 13 Friday, October 28, 2005 2:10 PM