Filter
Top Products
39
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)For assistance, please visit http://www.panasonic.com/phonehelp
Setting the Password
You can change the password for the call restriction. The factory preset
password is “1111”.
To set the password
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Program ?” by pressing [4] or
[
3], and press [OK] (Yes key).
3
Scroll to “Change password?” by
pressing
[4] or [3].
4
Press [OK] (Yes key).
5
Enter the current password.
6
Press [OK] (Next key).
• If the wrong password is entered, 3 beeps
will sound. Enter the correct password.
7
Enter a new password using a 4-digit
number. (Ex. “1234” is entered.)
8
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press [EXIT] or
wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
Please write down your password. If you forget your password, consult your
nearest Panasonic service center.
Change password?
34
[OK]=Yes
Current password
:----
[OK]=Next
Current password
:
¢¢¢¢
[OK]=Next
New password
:----
[OK]=Save
New password
:1234
[OK]=Save
TS600W.book Page 39 Friday, October 28, 2005 2:10 PM