Filter
Top Products
42
For assistance, please visit http://www.panasonic.com/phonehelp
Plugging the optional headset into the unit allows a hands-free phone
conversation.
Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88HA,
KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the
accessories telephone number on page 2.
Connecting the Optional Headset to the Unit
Connect the optional headset to the headset jack as shown below.
Making/Answering Calls
Make sure to install the batteries.
1
Press [SP-PHONE/HEADSET] to make or answer a call.
OR
Dial the number and press [SP-PHONE/HEADSET] to make a call.
•The SP-PHONE/HEADSET indicator lights.
• If you misdial during pre-dialing, press [ERASE] and enter the correct
number. Then press [SP-PHONE/HEADSET] for dialing.
2
To hang up, press [SP-PHONE/HEADSET].
• The indicator light goes out.
To adjust the headset receiver volume (4 levels):
While using the headset, press VOLUME [
3] or [4].
• During a conversation using the headset, you cannot switch the call to the handset
by lifting it off the cradle.
• If you disconnect the optional headset during a conversation with the handset on
the cradle, the call will be switched to the speakerphone.
• During a conversation using the speakerphone, you can switch the call to the
headset by connecting the headset.
If you want to have a normal conversation, disconnect the headset.
Headset
Jack
Hook
Optional Headset
TS600W.book Page 42 Friday, October 28, 2005 2:10 PM