Filter
Top Products
Special Features
40
For assistance, please visit http://www.panasonic.com/phonehelp
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out, except the emergency numbers (#)
stored in the Phonebook and Direct Dial memory ([M1], [M2] or [M3]).
To set the call restriction
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Program ?” by pressing [4] or
[
3], and press [OK] (Yes key).
3
Scroll to “Call restrict ?” by
pressing [
4] or [3].
4
Press [OK] (Yes key).
If you changed the password “1111”
(factory set), the display on the right
will be shown. Follow below steps 1
and 2.
1.Enter the password (p. 39).
2.Press [OK] (Next key).Go to step 5.
• If the wrong password is entered, 3
beeps will sound. Enter the correct
password.
5
Enter the number(s) (1 digit or 2 digits)
you want to restrict ([0] to [9]).
• If the wrong number is entered, press
[ERASE] and enter the correct number.
6
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press [EXIT] or
wait for 60 seconds.
Call restrict ?
34
[OK]=Yes
Restrict No.
:--
[OK]=Save
Enter password
:
¢¢¢¢
[OK]=Next
Enter password
:----
[OK]=Next
Ex: “9” is entered.
Restrict No.
:9-
[OK]=Save
TS600W.book Page 40 Friday, October 28, 2005 2:10 PM