Filter
Top Products
19
Basic Operation
For assistance, please visit http://www.panasonic.com/phonehelp
To put a call on hold
Press [HOLD].
• The SP-PHONE/HEADSET indicator flashes.
• If using the handset, you can place it on the cradle.
• During the hold, both party will hear music. For canceling music, see page 37.
To release the hold
If the handset is on the cradle, lift the handset.
If the handset is off the cradle, press [HOLD].
If using the speakerphone, press [SP-PHONE/HEADSET].
• If another phone is connected on the same line, you can also release the hold by
lifting its handset.
Answering Calls
When a call is received, the unit rings, the RINGER indicator flashes
quickly and “Incoming call” is displayed. You can answer a call by
simply lifting the handset.
If you subscribe to a Caller ID service, the calling party’s information will be
displayed when the unit is ringing (p. 20).
Using the speakerphone
1
Press [SP-PHONE/HEADSET].
• The indicator lights.
2
Talk into the MIC (microphone).
3
To hang up, press [SP-PHONE/HEADSET].
• The indicator light goes out.
• When the ringer volume is set to OFF (p. 13), the unit will not ring.
• The RINGER indicator will flash when
— a telephone number is dialed in PULSE mode, or
— someone picks up or hangs up another phone connected to the same phone
line.
This is normal.
TS600W.book Page 19 Friday, October 28, 2005 2:10 PM