Filter
Top Products
Special Features
38
For assistance, please visit http://www.panasonic.com/phonehelp
FLASH Button
Pressing [FLASH] allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “80, 90, 100, 110, 160, 200, 250, 300, 400,
600, 700, 900 ms (milliseconds)”. Your phone comes from the factory set to
“600 ms”.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Program ?” by pressing [4] or
[
3], and press [OK] (Yes key).
3
Scroll to “Set flash time ?” by
pressing
[4] or [3].
4
Press [OK] (Yes key).
5
Select the desired time by pressing
[4] or [3].
6
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press [EXIT] or
wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
• If the unit is connected via a PBX, PBX functions (transferring a call, etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
• If there is no battery, Flash function may not operate appropriately.
Set flash time ?
34
[OK]=Yes
Flash time
:600ms
34
[OK]=Save
TS600W.book Page 38 Friday, October 28, 2005 2:10 PM