Panasonic KX-TG2248S Telephone User Manual


 
8
Settings
Connections
USE ONLY WITH Panasonic AC ADAPTOR PQLV19 (Order No. PQLV19Z).
The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
The unit will not work during a power failure. To connect a standard telephone on
the same line, use the Panasonic T-adaptor KX-J66.
Installing the Battery in the Handset
Insert the battery ( ), and press it down until it snaps into the compartment ( ).
Close the cover.
To replace the battery:
Press the notch on the cover rmly and slide it as indicated
by the arrow. Replace the old battery with a new one (p. 9).
Close the cover and charge the battery for about 6 hours.
Battery Charge
Place the handset on the base unit and charge
for about
6 hours
before initial use.
The IN USE/CHARGE indicator lights and the
unit beeps once.
It is normal for the back on the handset to feel
warm during battery charge.
Fasten the AC adaptor
cord.
Hook
Single-Line Telephone Jack (RJ11C)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
1 2