Panasonic KX-TG2248S Telephone User Manual


 
24
Making Calls
To adjust the receiver/speaker volume while talking
3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for
the speaker.
To increase volume, press
[]
.
To decrease volume, press
[]
.
The display shows the current volume setting.
If you try to increase/decrease volume when it is at
the maximum/minimum level, the handset will beep
3 times.
Backlit LCD display
The lighted display of the handset will stay on for a few seconds after pressing a
button or lifting the handset off the base unit.
Lighted handset keypad
The dialing buttons will light when you press a button or lift the handset off the base
unit. The light will go out after a few seconds.
Answering Calls
When a call is received, the unit rings and
Incoming call
is displayed, and the
Ringer indicator on the handset and the IN USE/CHARGE indicator on the base
unit ash rapidly. If you subscribe to a Caller ID service, see page 25.
When the ringer volume is set to OFF, the unit will not ring (p. 17).
1
Press
[]
or
[]
.
You can also answer a call by
pressing any button except
[]
,
[]
and
[OFF]
.
2
To hang up, press
[OFF]
or place
the handset on the base unit.
Auto Talk:
If you set the Auto Talk feature to ON (p. 15), you can answer a call by
lifting the handset off the base unit.
Ex. Receiver volume: High
Speaker volume: level 6
Volume
Low High
CH Hold
>
>
Handset
>
>
[]
[OFF]
[]
Ringer Indicator