Filter
Top Products
Preparation
For assistance, please call: 1-800-211-PANA(7262)
11
Programmable Functions
Useful information:
• If
Select
is pressed while “
---(Go back)---
” is displayed, the unit will go
back to the previous menu mode. If you press the key in the main menu, the unit
will exit programming mode.
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table below.)
• You can exit programming mode any time by pressing
[OFF]
.
• If you do not press any buttons for 60 seconds, the handset will exit programming mode.
• If the handset has lost communication with the base unit, the handset beeps
3 times and “
No link to base. Place on cradle and try again.
” is
displayed.
• If
[]
,
[]
or any other buttons except
[MUTE]
and
[OFF]
is pressed while the
handset is on the base unit, the handset beeps 3 times and “
Please lift up
and try again.
” is displayed. Lift the handset and press the button again.
Function Menu Table
You can use the following functions to customize your unit. See the corresponding
pages for function details.
• After pressing
[MENU]
, you can also program menu items by direct commands
(
[0]
to
[9]
) instead of using the soft keys (p. 50).
Set dial mode
Set flash time
Set line mode
Get new Info.?
Turn CIQ off?
Ringer volume
Ringer tone
Main menu Sub-menu I Sub-menu II
Ringer setting
Message play
Date and time
Voice enhancer
Caller IQ
Intercom
Talk Caller ID
Initial setting
Number of rings
Recording time
Remote code
Recording mode
LCD contrast
Caller ID edit
Set tel line
Set answering
Change language
Auto talk
View Info.?
p. 13
p. 38
p. 14
p. 21
p. 20
p. 45
p. 41
p. 12
p. 14
p. 36
p. 15
p. 17
p. 18
p. 58
p. 57
p. 55
p. 16
p. 15
p. 13
p. 21
p. 29
* “Activate CIQ?” is
displayed before you
subscribe to openLCR
service.
“Turn CIQ on?” is
displayed when Caller
IQ is set to off (p. 55).