Filter
Top Products
27
For assistance, please visit http://www.panasonic.com/help
Voice mail service
Voice mail is an automatic answering
service offered by your service
provider/telephone company. After
you subscribe to this service, your
service provider/telephone company’s
voice mail system answers calls for
you when you are unavailable to
answer the phone or when your line is
busy. Messages are recorded by your
service provider/telephone company,
not your telephone. Please contact
your service provider/telephone
company for details of this service.
Listening to voice mail
message(s)
The unit lets you know that you have
new voice mail messages in the
following way:
s “
Voice mail
” is displayed.
1 Lift the handset or press
{SP-PHONE} and dial an access
phone number.
s You will get an access phone
number from your telephone
company.
2 Follow the pre-recorded
instructions.
3 Press {SP-PHONE} if using the
speakerphone.
s “
Voice mail
” will disappear from
the display.
s If “
Voice mail
” still display after
you have listened to your voice mail
messages, press {PROGRAM/
EXIT}, and then press and hold
{CLEAR} and “
Voice mail
” will
disappear.
Voice mail (VM) tone
detection
Your service provider/telephone
company sends special signals
(sometimes called “voice mail tones”
or “stutter tones”) to the unit to let you
know you have new voice mail
messages. If you hear a series of dial
tones followed by a continuous dial
tone after lifting the handset, you have
new voice mail messages. Soon after
you hang up a call or after the phone
stops ringing, your unit checks the
phone line to see if new voice mail
messages have been recorded.
Turn this feature off when:
s You do not subscribe to voice mail
service.
s Your service provider/telephone
company does not send voice mail
tones.
s Your phone is connected to a PBX. If you
are not sure which setting is required,
contact your service provider/telephone
company.
Turning VM tone detection
on/off
The default setting is “On”.
1 {PROGRAM/EXIT}
2 {4} / {3}: “
Program ?
” > {OK}
3 {4} / {3}: “
VM tone detect ?
”
> {OK}
4 {4} / {3}: Select the desired
mode > {OK}
5 {PROGRAM/EXIT}
Voice Mail Service
KX-TS880.book Page 27 Friday, October 15, 2010 5:04 PM