Filter
Top Products
Caller ID Service
24
For assistance, please visit http://www.panasonic.com/help
Caller list
Important:
≥ Make sure the unit’s date and time
setting is correct (page 11).
Viewing the caller list and
calling back
1 Press {4} or {3} to enter the
caller list.
2 Press {4} to search from the
most recent call, or {3} to search
from the oldest call.
3 To call back, lift the handset or
press {SP-PHONE}.
4 To exit, press {PROGRAM/EXIT}.
Note:
≥ If the item has already been viewed or
answered, “ ” is displayed.
≥ If “
No items stored
” is displayed in
step 1, the caller list is empty.
Editing a caller’s phone
number before calling back
1 Press {4} or {3} to enter the
caller list.
2 {4} / {3}: Select the desired
entry > {OK}.
3 Press {1} repeatedly until the
number is shown in the desired
format.
FLocal phone number
Example: 321-5555
GArea code - Local phone number
Example: 555-321-5555
H1 - Area code - Local phone number
Example: 1-555-321-5555
4 To call back, lift the handset or
press {SP-PHONE}.
Caller ID number auto edit
feature
Once you call back an edited number,
the unit will remember the area code
and format of the edited number. The
next time someone calls from the
same area code, caller information is
customized by the unit as follows:
s When the call is being received, the
Caller ID number is displayed in the
same format as the edited number.
s After the call has ended, the caller’s
phone number is displayed in the same
format as the edited number, when
reviewed from the caller list.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area, so that you can call
these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit
an entry in the caller list, then call that
number. After that, phone numbers
from that caller’s area code are edited
automatically.
The default setting is “On”.
1 {PROGRAM/EXIT}
2 {4} / {3}: “
Program ?
” > {OK}
3 {4} / {3}: “
Set auto edit ?
”
> {OK}
4 {4} / {3}: Select the desired
setting > {OK}
5 {PROGRAM/EXIT}
≥ Phone numbers from the 4 most
recently edited area codes are
automatically edited.
≥ If you fail to reach your destination
when making a call, the phone
number you dialed might have an
incorrect pattern. Edit the phone
number with another pattern.
≥ When this feature is turned off, the
unit will still be able to display caller
ID, but incoming caller ID numbers
will not be automatically edited.
≥ If you move to another area, you
may need to turn this feature off to
erase the previously edited area
codes. To use this feature again,
turn it on and reprogram the area
codes you want to edit once again.
KX-TS880.book Page 24 Friday, October 15, 2010 5:04 PM