Phonebook
19
For assistance, please visit http://www.panasonic.com/help
Finding and calling a
phonebook entry
Scrolling through all entries
1 Press {2} or {1} to enter the
phonebook list.
2 {4} / {3}: Select the desired
entry.
≥ Item with # at the beginning will be
displayed with first priority if call
restriction (page 22) is turned on.
3 Lift the handset or press
{SP-PHONE} to start calling.
Searching by first character
(alphabetically)
1 Press {2} or {1} to enter the
phonebook list.
2 Press the dial key ({0}j{9}, {£}
or {
#
}) which contains the
character you are searching for
(page 18).
≥ Press the same dial key repeatedly
to display the first entry
corresponding to each character
located on that dial key.
≥ If there is no entry corresponding to
the character you selected, the next
entry is displayed.
3 {4} / {3}: Scroll through the
phonebook if necessary.
4 Lift the handset or press
{SP-PHONE} to start calling.
Editing entries
1 Press {2} or {1} to enter the
phonebook list.
2 {4} / {3}: Select the desired
entry > {OK}
3 Edit the name if necessary
(15 characters max.: page 18)
> {OK}
4 Edit the phone number if
necessary (32 digits max)
> {OK} > {PROGRAM/EXIT}
Erasing entries
1 Press {2} or {1} to enter the
phonebook list.
2 {4} / {3}: Select the desired
entry > {CLEAR} > {OK}
≥ A beep sounds.
3 {PROGRAM/EXIT}
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you
are on a call. This feature can be used,
for example, to dial a calling card
access number or bank account PIN
that you have stored in the phonebook,
without having to dial manually.
1 During an outside call, press {2}
or {1}.
2 {4} / {3}: Select the desired
entry > {OK}
Note:
≥
When storing a calling card access
number and your PIN in the phonebook
as one phonebook entry, press
{
PAUSE
}
to add pauses after the number and PIN
as necessary (page 13).
≥ If you have rotary/pulse service, you
need to press {£} before pressing {2}
or {
1} in step 1 to change the dialing
mode temporarily to tone.
KX-TS880.book Page 19 Friday, October 15, 2010 5:04 PM