Panasonic KX-TS880B Telephone User Manual


 
Making/Answering Calls
13
For assistance, please visit http://www.panasonic.com/help
Pause (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a
calling card access number and/or
PIN in the phonebook, one-touch dial
or speed dial, a pause is also needed.
Example: If you need to dial the line
access number “9” when making
outside calls with a PBX:
1 {9} > {PAUSE}
2 Dial the phone number.
3 Lift the handset or press
{SP-PHONE} to start calling.
Note:
A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
Answering calls
When a call is being received, the unit
rings, the ringer indicator flashes
quickly and “
Incoming call
” is
displayed. You can answer a call by
simply lifting the handset.
Using the speakerphone
1 {SP-PHONE}
2 When you finish talking, press
{SP-PHONE}.
Note:
The ringer indicator will flash when
s a telephone number is dialed in
Pulse
” mode, or
s someone picks up or hangs up
another phone connected to the same
phone line.
This is normal.
Adjusting the unit ringer volume
You can select the ringer volume to
HIGH, LOW or OFF. The default
setting is HIGH.
OFF HIGH
RINGER
LOW
KX-TS880.book Page 13 Friday, October 15, 2010 5:04 PM