Filter
Top Products
Programming
22
For assistance, please visit http://www.panasonic.com/help
Special instructions for
programmable settings
Call restriction
You can restrict the unit from dialing
phone numbers beginning with
specified digit(s) (1 digit or 2 digits).
Phone numbers with the restricted
leading digits cannot be dialed out,
except the emergency numbers (#)
stored in the phonebook, one-touch
dial and speed dial.
≥
When call restriction is turned on, you
cannot store, edit, or erase the emergency
numbers begin with # in the phonebook,
one-touch dial and speed dial.
Setting the call restriction
1 {PROGRAM/EXIT}
2 {4} / {3}: “
Program ?
” > {OK}
3 {4} / {3}: “
Call restrict ?
”
> {OK}
≥ If you have not changed the unit
password (default: 1111), go to
step 5.
4 Enter the unit password > {OK}
5 Enter the number(s) (1 digit or 2
digits) you want to restrict
({0} to {9}) > {OK}
> {PROGRAM/EXIT}
Erasing the restricted number
1 {PROGRAM/EXIT}
2 {4} / {3}: “
Program ?
” > {OK}
3 {4} / {3}: “
Call restrict ?
”
> {OK}
≥ If you have not changed the unit
password (default: 1111), go to
step 5.
4 Enter the unit password > {OK}
5 Press and hold {CLEAR}
> {OK} > {PROGRAM/EXIT}
Changing the unit password
Important:
≥ If you change the password, please
make note of your new password. The
unit will not reveal the password to you. If
you forget your password, consult your
nearest Panasonic service center.
1 {PROGRAM/EXIT}
2 {4} / {3}: “
Program ?
” > {OK}
3 {4} / {3}: “
Change
password?
” > {OK}
4 Enter the current 4-digit password
(default: “
1111
”) > {OK}
≥ If you have entered the wrong
password, “
ERROR
” and “
----
” will
be displayed. Enter the correct
password.
5 Enter the new 4-digit password >
{OK} > {PROGRAM/EXIT}
KX-TS880.book Page 22 Friday, October 15, 2010 5:04 PM