Filter
Top Products
Programming
28
For assistance, please visit http://www.panasonic.com/help
Special programming
Night mode
Night mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each
handset.
Important:
L Set the date and time beforehand
(page 14).
L If you have set the alarm, the alarm
sounds even if the night mode is
turned on.
Changing the start and end time
1 {MENU} i {#}{2}{3}{7}
2 Enter the desired hour and minute
you wish to start this feature.
3 Press {*} to select “AM” or “PM”.
i {OK}
4 Enter the desired hour and minute
you wish to end this feature.
5 Press {*} to select “AM” or “PM”.
i {OK}
6 {OFF}
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
Turning night mode on/off
1 {MENU} i {#}{2}{3}{8}
2 {V}/{^}: Select “On” or “Off”. i
{SAVE}
3 {OFF}
L When the night mode is set, 3 is
displayed.
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
L Set the date and time beforehand
(page 14).
1 {MENU} i {#}{7}{2}{0}
2 {V}/{^}: Select the desired alarm
option. i {SELECT}
3 Enter the desired month and date.
4 Set the desired time. i {OK}
5 {V}/{^}: Select the desired alarm
tone. i {SELECT}
L We recommend selecting a
different ringer tone from the one
used for outside calls.
6 {SELECT} i {OFF}
L When the alarm is set, E is
displayed.
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
L The ringer volume for alarm follows
the higher volume level of the 2 lines
(page 25).
“Off”
Turns alarm off. Go to step 6.
“Once”
An alarm sounds once at the set
time.
“Daily”
An alarm sounds daily at the set time.
Go to step 4.
TG9321(e).book Page 28 Friday, May 28, 2010 4:34 PM