Filter
Top Products
Programming
27
For assistance, please visit http://www.panasonic.com/help
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 This tone lets you know when you receive an outside call while you are on the
other line or an intercom call. If you select “On”, the tone sounds 2 times.
*7 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select “Caller ID[auto]”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*8 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*10The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700 ms” unless pressing
{FLASH} fails to pick up the waiting call.
*11Generally, the line mode setting should not be adjusted. If c or d does not
display when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*12The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
TG9321(e).book Page 27 Friday, May 28, 2010 4:34 PM