Filter
Top Products
1
4
9
Error messages
Display message Cause/solution
Base no power
or
No link to base.
Reconnect main base
AC adaptor.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit. Reconnect
the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 32).
Check Phone Line
R The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 10).
Error
R Recording was too short. Try again.
Invalid Number
R You tried to send an SMS message to a phone number saved
in the phonebook, caller list, or redial list that is over 20 digits
long.
Memory Full
R The phonebook memory is full. Erase unwanted entries
(page 20).
R Message memory is full. Erase unwanted messages (page 40,
41).
R The call barred list memory is full. Erase unwanted entries
(page 31).
Use rechargeable
battery.
R A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 7.
You must first
subscribe to Caller
ID.
R You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
48
Useful Information
TG7851_61FX(en)_0215_ver011.pdf 48 2013/02/15 18:28:14