Filter
Top Products
Using SMS
SMS allows you to send and receive text
messages between other fixed-line and mobile
phones that support compatible SMS
networks and features.
Important:
R To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
Note:
R A total of 22 messages (at 160 characters/
message) can be saved. Total number may
be more than 22 if length of messages is
less than 160 characters/message.
R If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
1 M
N (right soft key) #357
2 MbN: Select the desired setting. a MOKN
a MeN
Storing SMS message
centre numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
R Contact your service provider/telephone
company for more information.
R If you change the unit’s region setting/reset
the base unit, the stored message centre
numbers will be deleted or changed
(page 24). In this case, store the numbers
again if necessary.
1 To store “Message Centre1”:
M
N (right soft key) #351
To store “Message Centre2”:
M
N (right soft key) #352
2 Edit the number as necessary. a MOKN
a MeN
Note:
R For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Sending a message
Writing and sending a new
message
1 M
N (right soft key) a a MOKN
2 MbN: “Create” a MOKN
R If “DUse Last Text?” is displayed,
you can use the text from the last
message you created by pressing MDN.
3 Enter a message. a MOKN
R You can change the character entry
mode by pressing MR/ECON
(page 46).
4 Enter the destination phone number (20
digits max.). a MOKN
To use the redial list:
MEN (T) a MbN: Select the phone
number. a MOKN 2 times
To use the caller list:
MCN (
) a MbN: Select the party. a
MOKN 2 times
36
SMS (Short Message Service)
TG7851_61FX(en)_0215_ver011.pdf 36 2013/02/15 18:28:13