Filter
Top Products
Making/Answering Calls
17
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 24.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 23).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing L.
Handset locator
You can locate a misplaced handset by
pressing {x} on the base unit.
L All registered handsets beep for 1
minute.
To stop paging, press it again or {ic}
on the handset.
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
1 Press 1 during an outside call.
2 {V}/{^}: “Hold” i M
3 To release hold, press {C}.
Note:
L If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound
and the ringer indicator flashes
rapidly. After 1 additional minute on
hold, the call is disconnected.
L If another phone is connected to the
same line (page 9), you can also take
the call by lifting its handset.
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1 Press 1 during conversation.
L 1 flashes.
2 To return to the conversation, press
1 again.
Recall/flash
{ECO/R} allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
L To change the recall/flash time, see
page 24.
For call waiting or Call Waiting
Caller ID service users
To use call waiting, you must first
subscribe to call waiting from your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services,
the 2nd caller’s information is displayed
after you hear the call waiting tone on the
handset.
TG7511_7521BX(e).book Page 17 Tuesday, June 15, 2010 2:10 PM