Filter
Top Products
Making/Answering Calls
16
Making calls
1 Lift the handset and dial the phone
number.
L To correct a digit, press ^.
2 Press {C} or ].
3 When you finish talking, press
{ic} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number and press
{s}.
L Speak alternately with the other
party.
2 When you finish talking, press
{ic}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1 j or {>} (R)
2 {V}/{^}: Select the desired phone
number.
3 {C}/{s}
L If {s} is pressed and the other
party’s line is engaged, the unit
automatically redials multiple
times. While the handset is
waiting to redial, the ringer
indicator flashes. To cancel,
press {ic}.
Erasing a number in the redial list
1 j or {>} (R)
2 {V}/{^}: Select the desired phone
number. i W
3 {V}/{^}: “Yes” i M i {ic}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 20).
Example: If you need to dial the line
access number “0” when making outside
calls with a PBX:
1 {0} i l
2 Dial the phone number. i {C}
Note:
L A 3 second pause is inserted each
time l is pressed. Repeat as
needed to create longer pauses.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2 When you finish talking, press
{ic} or place the handset on the
base unit or charger.
TG7511_7521BX(e).book Page 16 Tuesday, June 15, 2010 2:10 PM