Filter
Top Products
Sub-menu 1 Sub-menu 2 Settings Code
First Ring
*2,
*8
– 1: <On> 0: Off #173 –
Main menu: “Caller Barred”
*2, *13
Operation Code
Storing/Viewing bar call numbers. #217 28
*1 KX-TG6821 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TG6812)
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*5 KX-TG6812
*6 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*7 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*8 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*12 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*13 KX-TG6811 series: page 3
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 13).
1 M
N#720
2 Select an alarm by pressing 1 to 3. a
MOKN
26
Programming
TG68xxSA(en)_0619_ver011.pdf 26 2013/06/19 17:43:16