Filter
Top Products
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MOKN, then
proceed to step 2.
1 M
N#101
2 Enter the current date, month, and year.
a MOKN
Example: 15 July, 2013
15 07 13
3 Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
4 MOKN a MeN
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 M
N#120
2 MbN: Select the desired setting.
3 MOKN a MeN
Smart Function Key (NR
key)
The Smart Function Key (NR key) is located
on the bottom of the handset and informs you
with its flashing to allow you to activate the
following features by simply pressing this key.
n When the NR indicator flashes rapidly,
you can:
– Answer the call (outside call, intercom
*1
).
(page 15, 40)
– Stop the alarm sound. (page 27)
– Stop paging. (page 40)
*1 KX-TG6812
n When the NR indicator flashes slowly in
standby mode, you can:
– Listen to new messages.
*1
(page 34)
– View the caller list when there are
missed calls. (page 30)
To activate these features, their Smart
Function Key must be “On”. (page 14)
*1 KX-TG6821 series: page 3
Using the Smart Function Key
(NR key)
When the NR indicator flashes rapidly/slowly,
press M
N.
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
Function Key, the speakerphone is
activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
*1
without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages
*1
and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
*1 KX-TG6821 series: page 3
Note:
R While key lock is on (page 17), incoming
calls can be answered, but the following
features are disabled even when the NR
indicator flashes slowly.
– Listen to new messages.
*1
(page 34)
– View the caller list when there are
missed calls. (page 30)
*1 KX-TG6821 series: page 3
13
Getting Started
TG68xxSA(en)_0619_ver011.pdf 13 2013/06/19 17:43:15