Filter
Top Products
Useful Information
39
3 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until
it clicks into place.
4 Drive the screws (not included) into the wall using the wall mount template (see below)
as a guide. Mount the unit and slide it down into position. Connect the AC adaptor and
telephone line cord to their respective outlets (page 12).
Raise the antennas.
Screws
83 mm
To socket
Wall mount template for the base unit
83 mm
TG5921AL_5922AL.book Page 39 Friday, February 24, 2006 3:42 PM