Filter
Top Products
Multi-unit Operation
36
Transferring calls
between handsets,
conference calls
Outside calls can be transferred between 2
handsets. 2 handsets can have a
conference call with an outside party.
1 During an outside call, press
{INTERCOM} to put the call on hold.
2 Enter the extension number ({1} – {3}).
3 Wait for the paged party to answer.
L If the paged party does not answer,
press {C} to return to the outside
call.
4 To complete the transfer, press {OFF}.
L The outside call is being routed to
another handset.
To establish a conference call, press
{Conf}.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold, press
{HOLD}. To resume the conference,
press {Conf}.
Answering transferred calls
Press {C} to answer the page.
L After the paging party disconnects, you
can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
KX-TG5921
1 Handset:
{MENU} i {0}{0}
2 Base unit:
Press and hold {HANDSET
LOCATOR} until the CHARGE
indicator flashes.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
3 Handset:
Press {OK}, then wait until the handset
beeps.
KX-TG5922
Important:
L If you accidentally assign another
handset’s extension number to the base
unit, the originally assigned handset
stops functioning. Confirm the extension
number of the handset by placing it on
the base unit or charger. Lift the handset
from the base unit or charger before
registering.
1 Handset:
{MENU} i {0}{0}
Available model(s):
KX-TG5922
TG5921AL_5922AL.book Page 36 Friday, February 24, 2006 3:42 PM