Filter
Top Products
Useful Information
81
Battery recharge
Power failure
Problem Cause & solution
“Recharge battery” is
displayed, 3 flashes or
the handset beeps
intermittently.
L Fully charge the battery (page 13).
“Charge for 6 HRS”
and 4 are displayed
and the handset does not
work.
L The battery has been discharged. Fully charge the
battery (page 13).
I charged the battery fully,
but “Recharge
battery” is still
displayed and/or 3
continues to flash, or
“Charge for 6 HRS”
and 4 are displayed.
L Clean the charge contacts and charge again (page 13).
L The battery may need to be replaced (page 14). If you
install a new battery, fully charge it (page 13).
The CHARGE indicator
does not go out after the
battery has been
charged.
L This is normal.
The handset display is
blank.
L Confirm that the battery is properly installed.
L Fully charge the battery (page 13).
Problem Cause & solution
The unit will not function. L This product is not designed to make calls in the event
of a power failure. We recommend connecting a
standard telephone to the same telephone line in the
event that emergency calls need to be made during a
power failure (page 11).
TG5871AL.book Page 81 Friday, June 17, 2005 7:01 PM