Filter
Top Products
Answering System Features
66
Voice guidance
During remote operation, the unit’s voice
guidance will prompt you to press {1} to
perform a specific operation, or press {2}
to listen to more available operations.
Operations are presented by voice
guidance in the following order:
– Play back all messages
– Play back new messages
– Record a message
– Erase all messages
– Record your greeting message
Note:
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit will announce, “Thank
you for your call” then disconnect your
call.
L If less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time after the last
message is played back.
L If the unit announces “Memory full”,
erase unnecessary messages.
Remote commands
You can press dial keys to access certain
answering system functions without
waiting for the voice guidance to prompt
you.
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance will start.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
L The unit will answer your call with the
greeting message.
L You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 65).
Key Remote command
{1} Repeat message (during
playback)
*1
{2} Skip message (during
playback)
{4} Play new messages
{5} Play all messages
{7} Record a greeting message
{9} Stop (recording, playback)
*2
{0} Turn answering system off
{*}{4} Erase this message (during
playback)
{*}{5} Erase all messages
TG5871AL.book Page 66 Friday, June 17, 2005 7:01 PM