Filter
Top Products
Making/Answering Calls
23
Making calls using the
base unit
1 Press {SP-PHONE}.
L The SP-PHONE and IN USE
indicators light.
2 Dial the phone number.
3 When the other party answers, speak
into the MIC.
4 When finished talking, press {SP-
PHONE}.
L The SP-PHONE and IN USE
indicators go out.
Note:
L Talk alternately with the caller in a quiet
room.
L If the other party has difficulty hearing
you, press {V} to decrease the speaker
volume.
L While on a call, you can switch from the
speaker phone to the handset:
– If the handset is off the base unit,
press {C} or {s} on the handset,
then press {SP-PHONE} on the base
unit.
– If the handset is on the base unit,
simply lift the handset.
To adjust the speaker volume
8 levels (high to low) are available.
While on a call press {V} or {^} repeatedly.
To redial the last number dialled
1 Press {SP-PHONE}.
2 Press {REDIAL}.
Useful features during a call
HOLD button
This feature allows you to put an outside
call on hold.
Press {HOLD} during an outside call.
L The SP-PHONE indicator and IN USE
indicator flash.
L To return to the call, press {SP-
PHONE}.
L The handset user can take the call by
pressing {C} or {s}.
Note:
L If another phone is connected on the
same line (page 11), you can also take
the call by lifting its handset.
L If a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound. After 4 additional minutes on
hold, the call will be disconnected.
MUTE button
You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
To mute your voice, press {MUTE}.
L The SP-PHONE indicator flashes.
L To return to the conversation, press
{MUTE} or {SP-PHONE}.
IN USE indicator
{HOLD}
{CALL WAIT}
{RECALL}
{MUTE}
{SP-PHONE}
and indicator
{REDIAL} {PAUSE}
{V}, {^}
MIC
TG5871AL.book Page 23 Friday, June 17, 2005 7:01 PM