Filter
Top Products
Programmable Settings
20
Ringer Tone
You can set the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4”
are melody patterns. The factory preset is “Tone 1”.
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service from your telephone company with 2
or 3 distinct rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody
pattern, you will not be able to distinguish lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
—
another person answers the call using another phone connected on the same line.
Handset ringer tone
1 Press [MENU].
2 Press the soft key ( ) at “Ringer
setting”.
3 Scroll to “Ringer tone” by pressing [d] or
[B], then press the soft key ( ).
4 Select the desired ringer tone by pressing
[d] or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 18).
• You can also select the ringer tone by pressing
[1] to [7].
5 Press the soft key ( ), then press [OFF].
Handset
SELECT
Ringer setting
SELECT
Ringer tone
Ringer tone
1:Tone 1
SAVE
TG5230C_English.fm Page 20 Tuesday, May 11, 2004 9:08 AM