Filter
Top Products
Programmable Settings
16
Display Language
You can select either “English” or “Français” (French) as the display language. The
factory preset is “English”.
• If you select a language you cannot read, change the display language again
using direct commands (p. 67).
Talking Call Display Language
You can select either “English” or “Français” (French) as the language used for
voice prompts when using the Talking Call Display feature. The factory preset is
“English”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Change language” by pressing
[d] or [B], then press the soft key ( ).
4 Press the soft key ( ) at “Display”.
5 To change from English to French, press the
soft key ( ). To change from French to
English, press the soft key ( ).
• The display changes to the selected language.
• You can also select the display language by
pressing [d] or [B].
6
When French is selected, press the soft key ( ), then press
[OFF]
.
When English is selected, press the soft key ( ), then press
[OFF]
.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [d] or [B], then press the
soft key ( ).
3 Scroll to “Change language” by pressing [d] or [B], then press the
soft key ( ).
4 Scroll to “Voice prompt” by pressing [d] or
[B], then press the soft key ( ).
5 Select “Français” (French) or “English”
by pressing [d ] or [B].
• The Talking Call Display language changes to
the selected language.
6
Press the soft key ( ), then press
[OFF]
.
Handset
SELECT
Initial setting
SELECT
Change language
SELECT
Display
FRANÇ.
ENGLISH
Display
:English
SAUV
.
SAVE
Handset
SELECT
SELECT
SELECT
Voice prompt
Voice prompt
:English
SAVE
TG5230C_English.fm Page 16 Tuesday, May 11, 2004 9:08 AM