Filter
Top Products
Useful InformationAnswering System
Preparation
67
If the Following Appear on Your Display...
Telephone System
Display message Cause & Remedy
Save error
• The entered password was wrong in programming
the dial lock. Enter the correct password.
Dial locked
• The dial lock is turned on. If necessary, turn the dial
lock off (p. 56).
Invalid.
Please register
to the base unit
• The handset you tried to call has not been registered
to the base unit. Register the handset (p. 64, steps 5
and 6).
Error!!
4 handsets have
already been
registered.
• 4 handsets have already been registered to the base
unit. To cancel a handset’s registration, see page 63.
• You may have registered one of your handsets to
another base unit without deleting its registration to
this base unit. Erase the handset’s registration from
the base unit. For the KX-TG5230AL base unit:
(1) Press and hold [LOCATOR/INTERCOM/
TRANSFER] for 3 seconds, and
(2) Press and hold the handset number [1]
() to [4]
()
that you do not want for 5 seconds. A long beep
sounds, then the handset number is erased.
TG5230AL.fm Page 67 Friday, June 11, 2004 5:31 PM