Filter
Top Products
Special Features
56
• If the dial lock is turned on, the handset displays “Dial lock”, and the DIAL
LOCK indicator on the base unit lights. While there are missed calls, “Dial lock”
is not displayed.
To turn the dial lock off
(use either the handset or the base unit)
• If you make a call while the dial lock is turned on:
—
using the handset, the handset beeps 3 times and “
Dial locked
” is displayed.
— using the base unit, the base unit beeps 3 times.
• Please write down your password. If you forget your password, consult your
nearest Panasonic service centre.
1 Press [MENU].
2 Scroll to “Dial lock” by pressing [d] or
[B], then press the soft key ( ).
3 Enter the password set when the dial lock
was turned on.
4 Press the soft key ( ).
5 Press the soft key ( ).
• “Dial lock off” is displayed.
• If you entered the wrong password, the handset
beeps 3 times and “Save error” is displayed.
Enter the correct password.
6 Press [OFF].
1 Press [DIAL LOCK].
• The DIAL LOCK indicator flashes.
2 Enter the password set when the dial lock was turned on.
3 Press [DIAL LOCK].
• A long beep sounds and the indicator light goes out.
• If you entered the wrong password, the base unit beeps 3 times. Start again
from step 1.
Handset
SELECT
Dial lock
Enter password
:
_
_
_
_
SAVE
Enter password
:
;;;;
YES
Turn Dial lock
off?
Base Unit
TG5230AL.fm Page 56 Friday, June 11, 2004 5:31 PM