Filter
Top Products
If your service provider/telephone company
c
annot do this:
– Set this unit’s “Ring count” setting so that
this unit’s answering system answers calls
before the voice mail service of your service
provider/telephone company does. It is
necessary to check the number of rings
required to activate the voice mail service
provided by your service provider/telephone
company before changing this setting.
– Change the number of rings of the voice mail
service so that the answering system can
answer the call first. To do so, contact your
service provider/telephone company.
Caller’s recording time
Y
ou can change the maximum message recording
time allowed for each caller. The default setting is
“3 min”.
Handset
1 MM
ENUN#305
2 MbN: Select the desired setting. a MSAVEN
a MOFFN
Selecting “G
reeting only”
You can select “Greeting only” which sets the
unit to announce a greeting message to callers but
not record messages.
Select “Greeting only” in step 2 on “Caller’s
recording time”, page 35.
Note:
R When you select “Greeting only”:
– If you do not record your own message, the
unit will play the pre-recorded greeting-only
message asking callers to call again later.
– If you use your own message, record the
greeting-only message asking callers to call
again later (page 31).
Message alert
Y
ou can select whether or not the message
indicator on the handset flashes slowly when new
messages are recorded. The default setting is
“On”.
Important:
R If you stored the voice mail access number
(page 36), the message indicator also flashes
for newly recorded voice mail messages
(
page 36).
Handset
1 MM
ENUN#340
2 MbN: Select the desired setting. a MSAVEN
a MOFFN
Note:
R While message alert is on, battery operating
time is shortened (page 9).
For assistance, please visit http://www.panasonic.com/help
35
Answering System
TG477x(en-en)_1130_ver021.pdf 35 2011/11/30 15:57:56