Filter
Top Products
21
Chapter 1
Preparation
5
Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
1
Press (FUNCTION).
2
Press or until the arrow
points to “Dial setting”, and
press H.
3
While “Set dial mode” is at
the arrow, press H.
• The current settings are displayed.
4
Select “Puls” (Pulse) or “Tone”
by pressing or for each
line. To move to the other line,
press H or I.
Selecting the Dialing Mode
If your lines have touch tone service, set to “Tone”. If rotary or pulse
service is used, set to “Pulse”. Select the mode for each line. Your phone
comes from the factory set to “Tone”.
Make sure that the base unit is in the standby mode.
Base Unit
Dial mode
Line1 Line2
Tone Tone