Filter
Top Products
19
Chapter 1
Preparation
Registration for Additional Cordless Handsets
The included cordless handset is pre-registered at the factory and
assigned the handset number 1. Do not try to register the handset
number 1 which has “[1]” on the display. Optional handsets must be
registered at the base unit. You can add up to 7 optional handsets to the
handset number 1. Only one handset can be registered at a time. The
handset number is used as the extension number (p. 32, 58).
The model number of the optional cordless handset is KX-TGA200B. To
order, contact your dealer or call 1-800-211-PANA(7262) to locate a
dealer.
Make sure that the base unit and cordless handset are in the standby
mode. Registration must be completed within 1 minute.
Base Unit & Handset
1
Base unit:
Press (FUNCTION).
2
Press or until the arrow
points to “Registration”, and
press H.
3
Press or until the arrow
points to “HS registration”,
and press H.
4
Cordless handset:
Press (FUNCTION).
5
Press or until the arrow
points to “Registration”, and
press H.
6
While “HS registration” is
at the arrow, press H.
Handset
registering
7
Base unit/cordless handset:
Wait until a beep sounds on the
base unit and handset and until
both of the displays show the
assigned handset number.
Ex. Handset number is 2.
Handset
registering
• To return to the standby mode,
press (EXIT).
• The handset number ([1] to [8]) will
be displayed on the handset.
Handset2
registered
Handset2
registered
Base Unit
Cordless Handset
You can store a PIN (Personal
Identification Number) to prevent
unauthorized persons from registering
and using a cordless handset (p. 52).
Once the PIN is set, you must enter
the PIN at registration (p. 53). If you
forget your PIN, please refer to
“Clearing Settings” (p. 89).