Filter
Top Products
N
Handset Settings
20
Time settings
Alarm
An alarm will sound for 3 minutes at the set
time once or daily. Set the date and time
beforehand (page 11).
1 " (middle soft key) i N i #
2 “Time Settings” i #
3 “Alarm” i # 2 times
4 Select an alarm mode. i #
5 Enter the desired hour and minute. i
#
6 Select the desired ringtone. i #
7 “Save” i # i {ih}
L When the alarm is set, e is displayed.
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm
will not sound until the call has ended.
L If you select “Once”, the setting will
change to “Off” after the alarm sounds.
Ringer setup
Night mode
Night mode allows you to select a block of
time during which the handset will not ring
for outside calls. This feature is useful for
times when you do not want to be disturbed,
for example, while sleeping.
Using the handset phonebook’s category
feature (page 15), you can also select
categories of callers whose calls will
override night mode and ring the handset
(Caller ID subscribers only).
Set the date and time beforehand (page 11).
Note:
L We recommend turning the base unit
ringer off (page 22) in addition to turning
the night mode feature on.
Setting the start and end time for night
mode
1 " (middle soft key) i N i #
2 “Ringer Setup” i #
3 “Night Mode” i #
4 “Start/End” i #
5 Enter the desired hour and minute you
wish to start this feature.
6 Enter the desired hour and minute you
wish to end this feature.
7 # i {ih}
Turning night mode on/off
1 " (middle soft key) i N i #
2 “Ringer Setup” i #
3 “Night Mode” i #
4 “On/Off” i #
5 “On” or “Off” i # i {ih}
L When the night mode is set, f is
displayed.
Off Turns alarm off. Press #
again, then press {ih} to
finish.
Once The alarm sounds once at the
set time. Enter the desired
day and month.
Daily An alarm sounds daily at the
set time.
TG1861NZ(e).book Page 20 Thursday, June 1, 2006 4:54 PM